Ways of calculating the electromagnetic field intensity for assessment of electromagnetic compatibility of radio-monitoring stations

Authors

  • N. M. Kalyuzhniy Kharkiv National University of Radio Electronics, Ukraine
  • V. A. Kovshar Kharkiv National University of Radio Electronics, Ukraine
  • G. N. Semenov Kharkiv National University of Radio Electronics, Ukraine
  • A. B. Chernov Kharkiv National University of Radio Electronics, Ukraine
  • S. A. Galkin National Technical University "Kharkiv Polytechnic Institute", Ukraine

DOI:

https://doi.org/10.1109/ICATT.2015.7136797

Keywords:

electromagnetic compatibility, field intensity, Recommendation ITU-R 1546, Recommendation ITU-R 526

Abstract

The paper analyzes a possibility of using the verified by international scientific organizations calculation methods of signal attenuation and field intensity along the radio wave propagation path for assessment of electromagnetic compatibility of wideband radio monitoring stations equipped with radio electronic facilities of various purposes.

References

Calculation of free-space attenuation. Recommendation ITU-R P.525, 3 p.

Propagation by diffraction. Recommendation ITU-R P.526, 37 p.

BYKHOVSKY, M.A. Radiofrequency Spectrum Control and Electromagnetic Compatibility of Radio Systems. Tutorial. Moscow: Eko-Trends, 2006, 376 p. [ed. by M. A. Bykhovsky].

Prediction procedure for the evaluation of microwave interference between stations on the terrain surface at frequencies above about 0.7 GHz. Recommendation ITU-R P.452, 54 p.

Method for point-to-area predictions for terrestrial services at the frequency range of 30 MHz to 3000 MHz. Recommendation ITU-R P.1546-3, 57 p.

ICATT 2015 cover

Published

2015-04-25

Issue

2015: ICATT’2015 - Proc. of X Int. Conf. on Antenna Theory and Techniques

Section

General antenna theory