Electrodynamic modeling of two-port C-band flat antenna
DOI:
https://doi.org/10.1109/ICATT.1999.1236220Abstract
The results of designing at an electrodynamics level of the case flat two-port antenna of a circular polarization for satellite communication system in 4/6 GHz band with the sizes 280×130 mm2 and with printed emitters (9 for receiving and 18 for transmitting) are presented. The antenna has a dielectric plate with emitters, metal plate with rectangular slots, layer of air strip lines and two face coaxial inputs on the bottom metal plate. The general antenna thickness is 26 mm. The antenna has the –13 dB first sidelobes of a radiation pattern, ellipticity factor Ke~ 0.8 and VSWR ≤ 1.7. The antenna analysis was made in a time domain without decomposition on the basis of the stream grid technique.References
Sestroretsky, B.V.; Prigoda, B.A.; Ivanov, S.A.; Drize, M.A. Electrodynamics optimization of flat two-input VSAT antenna. Proc. of XXVIII Sci. Conf. on Antenna Theory and Technology, 22-24 September 1998, Moscow, Russia. Moscow: Radiophisika, 1998.
Hirokawa, J.; Manholm, L.; Kindal, P.S. Analysis of an Untilted Wire-Excited Slot in the Narrow Wall of a Rectangular Waveguide by Including the Actual External Structure. IEEE Trans., June 1997, Vol. AP-45, No. 5.
Jang, B.J.; Lee, Y.K.; Moon, H.W.; Yoon, Y.J.; Park, H.K. Analysis of Finite-Phased Arrays of Aperture-Coupled Stacked Microstrip Antennas. IEEE Trans., Aug. 1997, Vol. AP-45, No. 8.
Sestroretsky, B.V. Balance RLC and Rτ-circuits of elementary volume. Problems of Radioelectronics. Ser. General Problems of Radioelectronics, 1983, Vol. 5, p. 56-85.
